I just can't understand why so much of trouble. I have absolutely pulled out all things out. Not even case fan is attached to motherboard. Motherboard detects all things properly. But windows just refuses to install. Nov 19, 1, 67 So the Windows 7 Install Disc problem has been ruled out. Before you try installing windows again run Memtest86 on the machine. Make a bootable CD for Memtest so you can run it without windows. If memtest result is good, then go get a GWScan and run it.
GWScan bootable CD can be obtained via internet. Or use any other hard drive utility programs to do scan for errors. Then perform writing zero's, full scan. If you feel lazy doing this which I understand, remove the other two hard drives and just leave one in there to install windows. Are you running in Raid mode with multiple hard drives? And reset to factory defaults in the BIOS. Actually, do this rite now. Last edited: Oct 26, Thanks mate for such detailed instructions.
I did install new motherboard just yesterday. Its brand new. Now about hard disk,all extra disk are out and just one gb seagate is inside. What all attached is just DVD drive on second port. CPU fan. CPU cooler,power connector that's all. Absolutely no extra things. PS 2 mouse and USB keyboard. I am downloading those two test cd' s which you suggested.
It goes upto test 8 I think.. System completed all tests. In latest memtest All 8 and no errors reported. I changed sata cable also but no luck. I put cables which came with motherboard. Ubuntu livedisk also fails to install. I can scroll till run memtest and then it blanks out. I took photo of system health. If I were you I would try running GWScan and do a scan on the hard drive, making sure there are no errors on the sectors.
Or take the current hard drive out and put the other hard drive on. Do you have WinXp disc? Product functionality and graphics may vary based on your system configuration. Some features may require advanced or additional hardware. Windows 7 was designed to work with today's multi-core processors. Commercial servers, workstations, and other high-end PCs may have more than one physical processor. Windows 7 Professional, Enterprise, and Ultimate allow for two physical processors, providing the best performance on these computers.
Windows 7 More Support for Windows 7 ended on January 14, We recommend you move to a Windows 11 PC to continue to receive security updates from Microsoft. Thanks for your feedback. This thread is locked.
You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Recover Windows 7 from a serious error. These tools can help you get Windows 7 running again. Note: If you use a Tablet PC or other computer with a touchscreen, you might need to attach a keyboard and mouse in order to use Startup Repair and other tools in the System Recovery Options menu.
Turn on your computer, insert the Windows 7 installation disc or USB flash drive, and then turn off your computer. When the Install Windows page appears, click Install now to begin the installation process or click Repair your computer to access system recovery options. If the Install Windows page doesn't appear, and you aren't asked to press any key, you might have to specify that your computer uses its DVD drive or a USB flash drive as the first startup device. Note: Most newer computers can start from a USB device, but some older computers might not have this capability.
For more information, check the documentation that came with your computer or go to the manufacturer's website. Before you change BIOS settings, check the information that came with your computer or go to the computer manufacturer's website.
Specific procedures for accessing the BIOS and changing settings can differ depending on your computer's manufacturer, or you might be able to choose which startup device your computer uses without changing BIOS settings. The BIOS interface is designed for advanced users, and it's possible to change a setting that could prevent your computer from starting correctly.
Turn on your computer, insert the Windows 7 installation disc or USB flash drive, and then restart your computer. Newer computers often display a startup or boot menu.
Procedures vary depending on the BIOS manufacturer. Usually, you must press a key such as F2, F12, Delete, Esc or a key combination immediately after you turn on your computer but before Windows starts.
0コメント